Check whether your appliance is compatible with 2.4 GHz band or 5 GHz: Certain Home Connect appliances currently only work with 2.4 GHz band. Check your user manual to determine which bands your appliance will work with. When you connect an appliance, please change the settings for your network accordingly.

Encrypted Wi-Fi network: Home Connect will not work with open networks. It requires security level WPA2.

Compatible network modes: IEEE 802.11 a, b, g and n. Please ensure that your router is set up accordingly.

No browser registrations: Home Connect does not work with Wi-Fi networks which require browser registration, e. g. where the user name and password must be entered via the web browser.

Turn off the "MAC Filter" on the router to prevent MAC addresses for your home appliances and communication-enabled appliances from being saved.

The use of proxies is not recommended.

Ports 443, 8080 and 123 must be open.

Enable multicast-routing option: This option must be enabled on the router in order to establish a connection to Home Connect appliances.

Ensure you meet the minimum requirements

• Ensure your appliance is connected to the right network (Note some appliances only work with 2.4 GHz and will not connect to 5 GHz router). If using a dual band router ensure the names for the two networks are different. Check your appliance user manual for information on what network it can connect to.

Check for these common errors:

• Ensure your mobile device is on the same Wi-Fi network that you are connecting your appliance to connected to.
• Ensure you follow the Home Connect installation guide that came with your appliance. Each appliance requires different steps

Ensure you don’t use cellular connection during the pairing process: While pairing turn on airplane mode and then turn on Wi-Fi.

• Some devices will search for a connection that has Internet; during the paring process your mobile device will connect with the appliance‘s Wi-Fi network to transfer credentials. Since the appliance does not have an internet connection the mobile device will switch to another network that does, interrupting the pairing process.

Check your Wi-Fi connection

• Check whether you can get online with another device in your home. Make sure you are not using cellular connection to test your Internet connection.
• Ensure there is a strong network connection where the appliance is installed

Restart your router

• Unplug your routers (and range extenders/Wi-Fi repeaters) ensuring all lights are off. Keep unplugged for 30 seconds and then plug your routers back in. Wait until the router completely restarts and check the connection with another mobile device.
  Check your router‘s user manual for more information.

Reinstall the app and restart your mobile device

• Uninstall and download the latest version of the Home Connect app. After doing so restart your mobile device and begin the pairing process again.

Factory reset your appliance

• In your use and care manual you will find instructions for resetting your appliance.

Home Connect app error codes:

Error 4620
Error 5014
Error 1077
Error 1080
Error 1081
Error 1082
Error 1083
Error 1084
Error 1085
Error 1086

• Issue: Wi-Fi Problem.
• Possible reason: Wi-Fi requirements were not met.
• Answer/ First aid solution: Find our Wi-Fi requirements to proof and adapt (2.4GHz, ports are blocked, MAC filter, etc.). Additionally you can test your connection via mobile hotspot. In that case, your smartphone should not be connected to your home network.
• Addendum: If the connection fails again, we will forward the issue including our call back times to a Remote service near you.

Home Connect app error code:

Error 4613

• Issue: Connection to Home Connect Server fails.
• Possible reason: The connection to the Home Connect Server could not be established.
• Answer/ First aid solution: Uninstall, reload and reinstall the app, reset your home appliance (factory or network reset). Reconnect.
• Addendum: If the connection fails again, we will forward the issue including our call back times to a Remote service near you.

Home Connect app error codes:

Error C7101
Error E7101
Error 3404
Error 404

• Issue: Home appliance could not be connected.
• Possible reason: Home Connect data is missing.
• Answer/ First aid solution: Home Connect data has to be flashed by customer service.
• Addendum: Message to Home Connect inbox info.de@home-connect.com

Home Connect app error code:

Error 4623

• Issue: Home Connect Server is not available.
• Possible reason: Home Connect Server is not available during the pairing process.
• Answer/ First aid solution: You have to log out of the HomeConnect App and log in again. After that, the Home Connect Server should be reached.
• Addendum: If the connection fails again, we will forward the issue including our call back times to a Remote service near you.

Registration not possible:

• Issue: Password is not accepted during the registration process.
• Possible reason: Password does not meet he requirements (please be aware of security requirements for passwords).
• Answer/ First aid solution: Your password must consist of at least 8 characters, including at least 1 number, 1 letter and 1 special character. The first three characters must be different!
  Valid special characters: $ & + , ; : = ? @ # ! ´ < > . ^ * ( ) % _ -

Registration not possible:

• Issue: Home Connect mails are not received.
• Possible reason: Restrictions of your mail program.
• Answer/ First aid solution: Please check if a forward to a shared inbox is activated or if the mails were delivered to your spam folder.